Networking With CISCO Tools

Objectives

1. Identify major hardware

2. Devices in a computer network

3. Describe thw factors involved in choosing a network adapter, hub, switch, or router

4. Describe the functions of repeaters, hubs, bridges, switches, and gateways

5. Identify problems asociated with connectivity hardware

6. Connectivity devices enabling a workstation, server, printer, or other node to receive and transmit data over the network media

7. Sharing and managing networked components

8. Diagnosis and repairs

Pre-requisites

1. Excellent understanding of computer parts

2. Digital electronics

3. Basic knowledge require on computer network

Course Content

Module 1 :  Operation of IP Data Networks

• Recognize the purpose and functions of various network devices such as Routes, Switches, Bridges and Hubs.

• Select the components required to meet a given network specification

• Identity common applications and their impact on the network

• Describe the purpose and basic operation of the protocols in the OLI and TCP/IP models

• Predict the data flow between two hosts across a network

• Identity the appropriate media, cables, ports and connectors to connect network devices to other network devices and hosts in a LAN

 

Module 2 : LAN Switching Technologies

• Determine the technology and media access control method for Ethernet networks

• Identify basic switching concepts and the operation of switches.

• Collision Domains o Broadcast Domains o Types of switching o CAM Table

• Configure and verify initial switch configuration including remote access

• Management

• IOS commands to perform basic switch setup

• Verify network status and switch operation using basic utilities such as ping, telnet and ssh

• Describe how VLANS create logically separate networks and need for routing between them

• Explain network segments and basic the need for routing between them

• Explain network segmentation and basic traffice management concepts

• Configure and verify VLANS

• DTP

• Auto negotiation

 

Module 3 : IP Addressing (IPV4/IPV6)

• Describe the operation and necessity of using private and public IP address for IPV4 addressing.

• Identify the appropriate IPV6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.

• Identify the appropriate IPV6 addressing scheme using VLSM and summarization to satisfy addressing requirements in a
LAN/WAN environment.

• Describe the technological requirements for running IPV6 in conjunction with ipv4 such as dual stack

• Describe IPV6 addresses

• Global unicast

• Multicast

• Link local

• Unique local

• EUI 64

• Autoconfiguration

 

Module 4: Routing Technologies

• Describe basic routing concepts

• CEF

• Packet forwarding

• Router lookup process

• Configure and verify utilizing the CLI to set basic Router configuration

• IOS commands to perform basic router setup

• Configure and verify operation status of an Ethernet interface

• IOS commands to review basic router information and network connectivity

• Configure and verify routing configuration for a static or default

• Differentiate methods of routing and routing protocols

• Static VS Dynamic

• Link state vs Distance Vector

• Next hop

• Ip routing table

• Passive interfaces

• Configure and verify OSPF(single area)

• Benefit of single area

• Configure OSPF V2

• Configure OSPF V3

• Router ID

• Passive interfaces

• Configure and verify interVLAN routing(Router on a stick)

• sub interfaces

• Upstream routing

• Encapsulation

• Configure SVI interfaces

 

Module 5: IP Services

• Configure and verify DHCP(IOS Router)

• Configuring router interfaces to use DHCP

• DHCP options

• Excluded addresses

• Lease time

• Describe the types, features, and application of ACLSs

• Standard

• Sequence numbers

• Editing

• Extended

• Named

• Numbered

• Log option

• Configure and verify ACLs in a network environment

• Named

• Numbered

• Log option

• Identify the basic operation of NET

• Purpose

• Pool

• Static

• 1 to 1

• Overloading

• Source addressing

• One way NAT

• Configure and verify NAT for given network requirements

• Configure and verify NAT as a client

 

Module 6 : Network Device Security

• Configure and verify network device security features such as

• Device password security

• Enable secret VS enable

• Transport

• Disable telnet

• SSH

• VTYs

• Physical security

• Service password

• Describe external authentication methods

• Configure and verify Switch Port Security features as

• Sticky MAC

• MAC address limitation

• Static / dynamic

• Violation modes

• Err disable

• Shutdown

• Protect restrict

• Shutdown unused ports

• Err disable recovery

• Assign unused ports to an unused VLAN

• Setting native VLAN to other than VLAN 1

• Configure and verify ACLs to filter network traffic

• Configure and verify ACLs to limit telnet and SSH access to the router

 

Module 7 : Troubleshooting

• Troubleshoot and correct common problems associated with IP addressing and host

• configurations

• Troubleshoot and resolve VLAN problems

• Identify that VLAN are configure

• Port membership correct

• IP address configured

• Troubleshoot and Resolve trunking problems on switches

• Correct trunk states

• Correct encapsulation configured

• correct vlans allowed

• Troubleshoot and Resolve ACL issues

• Statistics

• Permitted network

• Direction

• Interface

• Troubleshoot and Resolve Layer 1 problems

• Framing

• CRC

• Runts

• Giants

• Dropped packets

• Lata collosion

• Input/output errors

 

Module 8 : LAN Switching Technologies

• Identify enhanced switching technologies

• RSTP

• PVSTP

• Etherchannels

• Configure and verify PVSTP operation

• describe root bridge election

• Spanning tree mode

 

Module 9 : IP Routing Technologies

• POST

• Router bootup process

• Configure and verify operation status of a serial interfaces

• Manage IOS Files

• Boot Preference

• IOS image

• Licensing

• Show license

• Change licence

• Differentiate methods of routing and routing protocols

• Administrative distance

• Split horizon

• Metric

• Next hop

• configure and verify OSPF)Single area

• neighbour adjacencies

• OSPF states

• discuss multi area

• configure OSPF V2

• configure OSPF V3

• configure OSPF V3

• Router ID

• LSA types

• Configure and verify EIGRP(single AS)

• Feasible Distance/Feasible Successors/Administrative distance

• Feasibility condition

• Metric composition

• Router id

• Auto summary

• path selection

• Load balance

• equal

• Unequal

• passive interfaces

 

Module 10 : IP Services

• Recognize high availability(FHRP)

• VRRP

• HSRP

• GLBP

 

Module 11 : IP Services

• Identify and correct common network problems

• Utilize netflow data

• Troubleshoot and Resolve spanning Tree operation issues

• root switch

• priority

• mode is correct

• port states

• Troubleshoot and Resolve routing issues

• routing is enabled

• routing table is correct

• correct path selection

• Troubleshoot and Resolve OSPF problems

• Neighbour Adjacencies

• Hello and Dead timers

• OSPF area

• Interface MTU

• Network types

• Neighbour states

• OSPF topology database

• Troubleshoot Resolve EIGRP problems

• Neighbour Adjacencies

• AS number

• Load balancing

• Split Horizon

• Troubleshoot and Resolve inter VLSN routing problems

• Connectivity

• Encapsulation

• Subnet

• Native VLAN

• Port mode trunk status

• Troubleshoot and Resolve Wan implementation issues

• Serial interface

• PPP

• Frame Relay

• Monitor NetFlow statistics

• Troubleshoot etherchannel problems

 

Module 12 : WAN Technologies

• Identify different WAN Technologies o ISDN

• DSL

• Frame Relay

• Cable

• VPN

• Configure and verify a basic WAN serial connection

• Configure and verify a PPP connection between routers

• Configure and verify Frame Relay on routers

• Implement and troubleshoot PPPoE

 

Module 13 :  Project Work

 

Quick Enroll
100% Placement Assistance
Top